STAUF - EHS 265 HYDRO-SEAL EPOXY PRIMER, 2.5 GALLON

Supplier SKU: EHS-265-2G60
East Bay Supply SKU: STFEHS2652G

STAUF EHS-265 Hydro-Seal is a two-component, hybrid-epoxy resin based primer for subfloor preparation prior to installation of urethane-based leveling compounds. Unlike water or urethane-based primer, EHS-265 is not affected by elevated subfloor moisture. It will not foam up or get weaker because of water present in the subfloor. It also has a higher penetration of the concrete compared to traditional 100% solid epoxies which creates a stronger bond. It does however NOT create a moisture barrier but merely reduces the amount of vapor penetration.

Features:

• Works under any type of flooring
• High solids content
• Creates dust-free surface
• No VOC; very low odor
• High spread rate
• Excellent penetration of the subfloor
• Contains no isocyanates, chlorinated solvents, or solvents
• Freeze/thaw stable
• Resistant against aging
• Suitable for radiant heat system

Approved Substrates:  

• Concrete slabs
• Ceramic tiles
• Stone, terrazzo
• Wet concrete slab up to 25#/24 hrs/1,000sf and 100% RH
• Stained concretes (well bonded)

Approved Trowels & Spread Rate:  3/8' nap roller - up to 320 sq. ft. per gallon

Dry Time:  Approximately 2 hours or until clear 

Installation Conditions:

• Temperature range:  50-90°F
• Relative Humidity:  30-80%

Shelf Life: Two years from date of manufacture in original, unopened container

Technical Data Sheet